PDA

View Full Version : I do not have sound!


Greg Quinn
Sep 27, 2007, 11:44 AM
I hooked up the computer to a new place today. I am using my monitor speakers but they will not allow sound. I have gone through everything and can't find the right default, Windows XP Compaq Presario. Hp monitor has been set to factory default.

Greg Quinn
Sep 27, 2007, 11:45 AM
I went into my settings and set it for no outside speakers as well and still nothing.

Bluehazel1953
Sep 27, 2007, 12:15 PM
You have been in Device Manager to look for faults, have you got the loudspeaker icon in your notification area? Try Run> dxdiag> enter> sound and follow instructions. DavidB

ScottGem
Sep 27, 2007, 12:21 PM
Are you sure you connected the wire from the monitor to the speaker jack? Did you check volume settings.

Greg Quinn
Sep 27, 2007, 12:41 PM
Scott apparently I have agreed with you a little too much as now I have to spread some kudos around before agreeing. Yes there was a second cord I accidentally left in my master room. YAY!! I owe you one. I FEEL STUPID!

Thank you

ScottGem
Sep 27, 2007, 12:42 PM
I've done it too.

Bluehazel1953
Sep 27, 2007, 12:56 PM
Keep it simple Scott eh? DavidB.

1life
Sep 28, 2007, 05:50 AM
I hooked up the computer to a new place today. I am using my monitor speakers but they will not allow sound. I have gone through everything and can't find the right default, Windows XP Compaq Presario. Hp monitor has been set to factory default.
Install the sound drivers

ScottGem
Sep 28, 2007, 05:53 AM
install the sound drivers

It's a good idea to browse through the thread before you jump in with an answer. If you had, you might have notices that the OP solved the problem which was due to a missing cable.

Greg Quinn
Oct 4, 2007, 09:57 AM
I had that happen with so many pages... People sometimes will not read details and still give advice. No offence to 1life.