[FO
NT="Arial"]I have a Central Park Riding Mower 18 hp 44 inch cut. I need a schematic of the belt configuration. There are two belts, one short and one long. These drive the cutting blades. Can you help me?

Try mtd.com, central park was originally sold by Handy Andy. I do not know for sure, but you may be able to obtain info. From mtd.

When asking questions like this you need a model number or at least an approximate date of manufacture. If you can't find it, it should be on the back of the mower or under the seat. What I can tell you is that your mower was made by Murray of Ohio for Handy Andy home improvement centers. Both of which went through bankruptcy. Handy Andy no longer exists at all and Murray was bought out by Briggs and Stratton co. However B&S no longer supports mowers made before 2005. You may however be able to get some help from after market parts distributors such as Willards small gas engines etc. There are still a lot of parts floating around but the parts people are going to be the people that can help you with images from the manuals that show the belt routing and their part numbers.

I hope that helps some one...