I have a 1988 Dodge Dakota 3.9 manual trans. The maintenance required light is on I have run the code and have done a safety inspection. How do you turn the light out?? [

I have a 1988 Dodge Dakota 3.9 manual trans. The maintenance required light is on I have run the code and have done a safety inspection. How do you turn the light out????????[
On Dakota, the module is located behind the instrument panel on a bracket below the headlamp switch.
RESET PROCEDURE

1. Turn ignition key on.
2. Insert a small screwdriver into small hole on module case and close switch.
3. Turn ignition key off.
4. Remove module from bracket.
5. Remove module battery cover and install a replacement 9 volt battery (if equipped).
6. Reinstall module on mounting bracket.

Code 12 is simply a reset indicator.
Code 33 is A/C cut-out relay fault.
It may not be working, possibly stuck or corroded?
How's the A/C functioning?

.

Got your answer to code 12 and 33, this unit doesn't have AC.

Got your answer to code 12 and 33, this unit doesn't have AC.
You must not live in the south! :eek: