CISCO FIREWALL DRIVING ME CRAZY: Anyone know how to restore default configuration for Pix 501 Firewall. I have created a Hyperterminal link and I have used the enable command now I am stuck at the password.
Quit Quit from the current mode, end configuration or logout
Pixfirewall> configure factory-default [inside ip address [address_mask]]
Type help or '?' for a list of available commands.
Pixfirewall> enable
Password: *****
Invalid password
Password: *****
Invalid password
Password: *****
Invalid password
Access denied.
Pixfirewall> enable
Password:
Invalid password
Password: ***

I think you need to do a password recovery and you can choose your cisco device type to get the recovery steps >> (http://www.cisco.com/warp/public/474/index.shtml)