View Full Version : Maytag dryer taking too long to dry
drmck
Aug 5, 2007, 11:25 PM
HELP! I have a Maytag Neptune MDG9700A front load dryer that takes FOREVER to dry clothes. I usually have large loads, but even the small ones take forever. It takes on average 2 hours to dry a load. I use the AutoDry sensor mode mostly, I just changed to the timed dry, but it doesn't seem to be getting hot enough. I vacuumed out the lint trap in the front, I clean it EVERY load. I also had my husband change the vent in the back thinking it was clogged and too long. So he bought and installed a shorter one. Please help, I hate waiting all day to finish my laundry.
esquire1
Aug 6, 2007, 02:21 PM
Could be a bad thermostat but first disconnect the vent hose from back of unit and do a load and see if it dries more quick and post back with results. To check the thermostats, unplug the unit from wall and pull one wire off the thermostat and check for continuity. If none, replace.
drmck
Aug 9, 2007, 10:01 AM
Thanks for the answer. Before trying this, I had my husband check the outlet and clear it if necessary. Well it was very necessary, it was clogged with tons of lint, so once he cleaned it out my dryer worked like new! Thanks for the help! :)
esquire1
Aug 9, 2007, 03:04 PM
Yes, a clogged vent will cause deying problems.. Cleaning vents should be a part of routine maitenence. Glad you got problem solved. Visit this great site often.
MOWERMAN2468
Aug 10, 2007, 04:10 PM
Man you got that done quickly. Glad you are up and going.