PDA

View Full Version : PC Freeze then No signal on Monitor


rafanelli
Jul 28, 2007, 03:27 PM
Hi,

I was using my PC which then froze and I switched off from mains (doh), after I tried to reboot the monitor would display 'no signal', I have lights on Motherboard, The CPU Fan is working, Reseated RAM, Removed Battery for 30mins, Graphics is on-board so don't know, I get a clicking sound rather than beep when I power up, any suggestions would be appreciated.

Thanks

rafanelli
Aug 5, 2007, 05:06 AM
Hi,

I was using my PC which then froze and i switched off from mains (doh), after i tried to reboot the monitor would display 'no signal', I have lights on Motherboard, The CPU Fan is working, Reseated RAM, Removed Battery for 30mins, Graphics is on-board so dont know, I get a clicking sound rather than beep when i power up, any suggestions would be appreciated.

Thanks

For me this has turned out to be a Motherboard/Graphics Card Issue

Tested with different PSU still same problem
Tested with different HD still same problem
Reset BIOS via MB Jumpers still same problem
Reset BIOS via Battery Removal still same problem
Removed Memory Cards/other Cards one-by-one still same problem
No Beep from BIOS however during testing it did work OK twice and went back to same problem indicating probable motherboard/on-board graphics chip faulty.

Hope this helps anyone with similar problem