I have an Airmak AM207 ceiling fan. It has a 3 way switch with 4 wires. I am replacing the old switch and got the wires mixed up. What is the right order and color for L 1 2 3. The black is the line, grey goes to the reversing switch, purple and brown come out of the capacitor which is a Lung Chang 3 wire, 3+1.5uF300vac.

Thank you!

Try:
L Black
1 Gray
2 Brown
3 Purple

Ceiling fan pull chain replacement and repair - Ceiling Fans N More (http://www.ceiling-fans-n-more.com/ceiling-fan-pullchain-replacement-and-repair.php)

OMG, it works! Thanks a lot :)

I actually stole the info from Ceilingfans link above.

We have a hunter 3 speed switch ceiling fan I would like to make some change to pull the lights on- off by a pulling switch and operate the fan with a switch in the wall is it possible, and what are the steps to make the changes.

The Fan will need Your Ground and neutral, also a constant hot for the light, and a wire to your switchbox which will control the fan, then you can control the fan by pull chain, of a Fan Controller(Set the pullchain for fan on high)