tomk007
Jul 24, 2007, 02:05 PM
Hi,
My 14 year old washer stopped going into the spin cycle. I took it apart and found the motor coupler was broken so I replaced it. I also replaced the agitator dogs since these were worn out. This did not fix the problem. I checked the lid switch and it seems to be working since the water stops draining when I lift the lid up.
Any suggestions?
Thanks,
Tom
My 14 year old washer stopped going into the spin cycle. I took it apart and found the motor coupler was broken so I replaced it. I also replaced the agitator dogs since these were worn out. This did not fix the problem. I checked the lid switch and it seems to be working since the water stops draining when I lift the lid up.
Any suggestions?
Thanks,
Tom