I need to know how to get the "user password" for my Craftsman Keyless pad Model 139.53684. It was on the house when I moved in... :confused: I need to program it with my new passcode.

Locate the smart button. I will be behind the lite cover. It will be red or orange. Press and release the smart button. You will have 30 sec. to program. Now go and enter new 4 digit code. Then press enter and hold for 5 se.. When the light stops flashing test your new # Good Luck

So I want to make sure that I'm clear. The garage door opener, wall mount opener pand visor remotes works fine. The wireless keypad had a dead battery and I don't know the previous code. I replaced the battery and I just want to program the wireless keypad ONLY without wiping out the wall mount and visor remotes. Please help!:confused: :)

This is the only way to reprogram the wireless keypad unless you can get the code that is already programed in it

Try this, Read before pressing buttons, Pressing too long may erase all codes:
Keyless Entry and Remote Control Programming Instructions, Chamberlain (http://www.chamberlain-diy.com/diy04/programming_instructions/0,1341,uid-eGqBZ2JjYWBrbA==_2310,00.html)