got the new starter for my jeep, just need to know how to change it out. Anyone know?

it's a 1993 Jeep cherokee Sport inline six 4.0 Ltr 4x4

4.0L/6-243 & 5.2L/V8-318

1. Disconnect battery ground cable. Safety is paramount.
2. Raise and support vehicle, then disconnect starter motor electrical connections.
3. Remove support bracket to starter retaining bolts, if equipped.
4. Remove starter motor attaching bolts, then the transmission line clip, if equipped.
5. Remove starter motor and shims, if used.
6. Reverse procedure to install. Reinstall any shims that were removed.

(online data)

Good luck!

4.0L/6-243 & 5.2L/V8-318

1. Disconnect battery ground cable. Safety is paramount.
2. Raise and support vehicle, then disconnect starter motor electrical connections.
3. Remove support bracket to starter retaining bolts, if equipped.
4. Remove starter motor attaching bolts, then the transmission line clip, if equipped.
5. Remove starter motor and shims, if used.
6. Reverse procedure to install. Reinstall any shims that were removed.

(online data)

Good luck!


Thanks so much, you helped tons! :D