PDA

View Full Version : Junction box on an 1999 Oakwood doublewide


sandpeople
Jul 7, 2007, 10:04 AM
Does anyone happen to know how or where to find the junction box on a doublewide? We have lost power to our lights and outlets on our front wall to our house. We had a electircian come and take a look but he said that unless we can find out where the junction box is he can't fix the problem. I have searched the web trying to find a way to obtrain the electrical floor plan for our house but haven't been able find anything. We are hoping someone on here can help us!

Thanks in advance

Jason

nauticalstar420
Jul 7, 2007, 10:14 AM
My husband is an electrician. He says you would probably have to cut through the insulation under the floor to get to the junction box. He also says that every mobile home is different, so he wouldn't be able to tell you where under the floor it is, but at least there's a start :)

Stratmando
Jul 7, 2007, 11:59 AM
I would remove panel cover and verify all breakers have voltage out. If all good, then
I would look underneath, along center, where 2 halves meet. Look for access. 4 screws may cover. Would also look in any closets or places to hide junction box, also along center line.