My buddy gave me an old G8000 and under the cover I have three wires that I don't know where they go , all three come out of the altenater , two short fat ones and a long thinner one with a open end loop term. the others have eye term. the two short ones look like they might ground to the reactor but not sure , please help , thanks Jim

Try this site Lincoln Electric (http://www.lincolnelectric.com/) and then click on links. You should find a manual there. Hillman, what is a reactor on a welder?

I am trying to locate a kck down solonoid for the low high idle do you know where I can purchase one linclon says they have discontinued this welder