spgray853
Jul 5, 2007, 10:18 AM
The drive belt that propels the machine keeps coming off the idler pulley. It appears that the idler pulley is positioned we below the other two pulleys. Is there a way to move the idler pulley up so it aligns with the others.
MOWERMAN2468
Jul 5, 2007, 10:32 AM
Check To See If The Pulley Has A Lot Of Slap, Or Slack In It Where It Has The Bolt Through It, The Bearings May Be Going Bad In The Pulley. I Don't Really Know How Much Lower You Are Talking About , A lot To Me Maybe 1/4" Where To You It May Be 1 1/2" , Just Can't Tell Without More Info. Check To See If The Pulley Mounting Arm Appears To Be Bent.
If This Helps Please Rate It.
Thanks, Mowerman2468