I need to change the Baffles in my dryer as they are loose and clothes, coins and dryer sheets are getting caught under neath them, but I can not figure out how to get into the dryer to tighten them. It is a stackable washer dryer pair with the dryer on top. I searched out how it might be done , but I still have not been able to figure it out! :confused: HELP!! I need step by step guidance!

Thanks!

You have to place a putty knife under the lid approximately three inches in from each side and push hard and lift top. If you look into the crack between the lid and body of dryer you should see the clips you have to push against to lift it up. Rotate the drum by hand and you'll see the scews that hold the baffles on. Hope this helps.
Pipemaster17