conchytom
Jun 21, 2007, 03:25 PM
I'm replacing a Honeywell LR69071 with a RTH230B.
The LR69071 is currently wired the following.
W2 white
R red
G green
Y yellow
B blue
X black
The instructions state that if a 5 wire system remove jumper. This configuration is using 6 wires. What wire can be eliminated and what wire goes where?
The LR69071 is currently wired the following.
W2 white
R red
G green
Y yellow
B blue
X black
The instructions state that if a 5 wire system remove jumper. This configuration is using 6 wires. What wire can be eliminated and what wire goes where?