Is it possible to add a receiver that would split the power (lights and Fan) in the Fan box then use a single gang switch that has the transmitted to control the lights (dim and bright) and fan independent from one another. The only thing I would have to make sure is the fan switch should only be an on and off switch the voltage to the fan can not be varied it has to be a 110 voltage)

Thanks
Don Wade

You can have a light/fan transmitter, and use wires to go to another light, (not attached to fan), So the 2 separate fixtures can be operated with one remote.
You can have a light/fan controlled by wall transmitter and remote control.
Don't know if I answered question?

Yes you can buy remote/receiver kits that have RF wall switches.

Ceiling fan remote controls - help and FAQ- Ceiling Fans N More (http://www.ceiling-fans-n-more.com/ceiling-fan-controls.php)