jayaprakash
May 7, 2007, 11:05 AM
Sir,
I am using P4 3 MHz, 160 GB Seagate 7200 Baracuda+80 GB WDC (Both Sata), 1 GB DDR2 on Asus 915 P5GD2-TMX/S (HCL) MB, using Win XP SP2.
Since today afternoon after a trojan attack, I found that whenever I laft click the drives access denied message appears. But you can open the drive by right clicking and clicking the open command. Also there is an additional open (0) command-this command gives access denied screen.
Is there any work around to remove this fault.
All the viruses were removed thro AVG
Hope sombody can throw some light on this issue.
Regards
JP
I am using P4 3 MHz, 160 GB Seagate 7200 Baracuda+80 GB WDC (Both Sata), 1 GB DDR2 on Asus 915 P5GD2-TMX/S (HCL) MB, using Win XP SP2.
Since today afternoon after a trojan attack, I found that whenever I laft click the drives access denied message appears. But you can open the drive by right clicking and clicking the open command. Also there is an additional open (0) command-this command gives access denied screen.
Is there any work around to remove this fault.
All the viruses were removed thro AVG
Hope sombody can throw some light on this issue.
Regards
JP