Log in

View Full Version : Roper dryer not heating and settings knob not turning


cev318
Apr 29, 2007, 03:54 PM
I have a roper dryer and it has stopped drying. I have taken the back off and tested the continuity on the element and on the 2 thermostats on the element housing and they all have continuity. I have noticed that when I run the dryer that the settings knob does not turn it stays in the same spot and the dryer just runs endlessly. Is this why my dryer does not dry and how hard is it for a d.i.y'er. Any help is appreciated

RalphS
Apr 29, 2007, 07:08 PM
While you were back there testing the thermostats you should have also tested the thermal fuse for continuity besides the element also. The timer dial will not advance on the automatic cycles if no heat is produced.
Good luck.