I have a 110.20072992 that won't spin, agitate, or drain. I have walked through the diagnostic mode and get no activity except for getting water into the tub. I have scanned forums and run across possible solutions (coupling, controller board) but those are solutions for partial symptoms. I haven't seen a solution that solves all 3. I don't hear any "noises." The machine goes through it's cycles like normal just no action. Any suggestions?

It is NOT the coupler, it would still drain if the coupler is bad. Not the lid switch, it would still agitate. It's probably in the control problem although I have repaired a broken wire on the motor switch.
Sorry, that's the best I can do.