Hi there our dishwasher quit this week and I need some help. It seemed to quit mid cycle and now the "washing" light is flashing. I've tried turning the power off and back on and nothing seems to work. I of course don't have the manual and Sears likes to keep everything a secret and therefore don't have e-manuals so I am looking for any advise.
Thanks

Hi there our dishwasher quit this week and I need some help. It seemed to quit mid cycle and now the "washing" light is flashing. I've tried turning the power off and back on and nothing seems to work. I of course don't have the manual and Sears likes to keep everything a secret and therefore don't have e-manuals so I am looking for any advise.
Thanks
Good luck! Ours has been out since last August. I'm going to have to bite the bullet and pay to have a Sears repairman come check it out.

Hi there our dishwasher quit this week and I need some help. It seemed to quit mid cycle and now the "washing" light is flashing. I've tried turning the power off and back on and nothing seems to work. I of course don't have the manual and Sears likes to keep everything a secret and therefore don't have e-manuals so I am looking for any advise.
Thanks
I went through the questions here and found on about page 3 or 4 another person who had the same problem. Someone suggested pressing buttons - hot wash, hot dry 5 times to reset it. Well, just out of curiosity, I went, plugged ours back in (it has been unplugged since last August) and low and behold... it's working!

Good luck!

Ours must be a slightly different model as it doesn't have a hot dry button on the front, it has sani rinse and a hot temp scrub buttons but no hot dry button only an air dry one. Any other ideas it may have got the panel wet as we spilled water on the counter and some of it ran onto the panel of the dishwasher. Help I don't want to buy another one and am getting dishpan hands:mad: