Hi,

I want seamless connections for 3/4" Copper tube. Where can I buy them?

I can't see to find any fittings that allow for a seamless 3/4" appearance when all connected.

It would be similar to:
https://www.kegworks.com/flush-elbow-fitting-90-degree-sunset-copper-2-od

Hi Badboi, may I ask where you plan on using this fitting ? Perhaps, there is another way of connection other than utilizing this quite unusual fitting

Back to you

Milo

This might be what you are looking for.

https://www.zoro.com/nibco-flush-bushing-wrot-copper-38-x-14-in-618-38x14/i/G2149497/?gclid=CO25hfa7i9ACFQmOaQodGAELwg&gclsrc=aw.ds

Hi,I want to make a table with copper legs. Similar to this: http://forme-foryou.com/2014/02/diy-copper-coffee-table.htmlAt the elbows and Tee connections I want a seamless flush connection (not like what is shown on the Link above)I could buy a tube bender and achieve the look I want but that is more complicated. Are there fittings out there that are a true 3/4" O.D. for the elbow so its seamless to the pipe?Thanks

That link appears to be dead. Can you re-post ? Thank you

http://forme-foryou.com/2014/02/diy-copper-coffee-table.html

Here is the link, Thanks.

John

DIY Copper Coffee Table (http://forme-foryou.com/2014/02/diy-copper-coffee-table.html)