Helping a senior citizen lady whose Kenmore H3 had the F02 (won't drain) error code. I checked everything relative to F02 and put it all back together. It ran a full wash cycle and drained perfectly, although I am not sure what I fixed, if anything. But when I got down to 1 minute in the final spin cycle, it just wouldn't finish. It kept doing a slow spin and ramping up to a full high speed spin, then slowing down like I was going to stop, but then would repeat the spin over again. Finally had to just manually stop it. This was not occurring prior to my efforts. Does anybody recognize this problem? Help!!

See if these will help: https://dl.dropboxusercontent.com/u/8010163/Whirlpool-Kenmore%20washers.zip
https://dl.dropboxusercontent.com/u/8010163/Understanding%20automatic%20washer.pdf
https://dl.dropboxusercontent.com/u/8010163/Kenmore_Washer_Elite.pdf
These should help you to understand. My guess is that you have a simple problem like a stuck solenoid. Look here: https://www.youtube.com/watch?v=704kGyKhJaU
https://www.youtube.com/watch?v=704kGyKhJaU&list=PLB0D6DCF9E211E685 (11 videos)