I am at a loss with this one. Original remote went bad it had a reverse No pull chains or switches Not sure of brand but I think Hunter Bay No tag anywhere. Here is the problem I bought a remote kit that does not have reverse That was OK with me I never use it in up draft mode anyway. I installed per instruction and all was well Fan was working, all three speeds and light as well. Down draft as I wanted. It worked like that for several weeks then one day when I turned it on it was in updraft mode. I can not figure out how it reversed it's self . Tried reversing power feed . Receiver has two power wires and three fan wires . One for light two for motor, color coded . Anyone out there can help me ? How do I reverse this
Thing ?

This is a long shot, but take a look at this post:
https://www.askmehelpdesk.com/electrical-lighting/ceiling-fan-remote-control-1770.html

Good luck,
WallyH

No switches, not even a small black slide switch on the side of the motor? Open this https://www.google.com/search?q=ceiling+fan+reversing+switch&biw=1675&bih=824&tbm=isch&imgil=xcexmIwpnfRkgM%253A%253B3pntM--CzvQT3M%253Bhttp%25253A%25252F%25252Fwww.delmarfan s.com%25252Feducate%25252Fbasics%25252Fwhat-is-the-proper-ceiling-fan-direction%25252F&source=iu&pf=m&fir=xcexmIwpnfRkgM%253A%252C3pntM--CzvQT3M%252C_&usg=__mY_q6p_SFu6JavD1i5MdASndp6k%3D&ved=0CDQQyjc&ei=W_yMVJHzDo6-yAS_iIDoDA