themickel
Jul 7, 2014, 07:04 PM
Just bought a new home. The Lennox hs26-030-2p unit has worked fine for a month, but just last night stopped blowing cold air. The internal blower is fine; the problem is in the outside unit. The fan is no longer working.
The fan rotates if pushed manually (it hasn't locked up). I've hit the high pressure reset button. Afterwards the unit will hum for a minute or two (no fan rotation) before turning off again. I've noticed a small amount of dried freon on some of the coils, so apparently there is a leak. I'm assuming this is the root of the problem.
However, will the fan stop turning due to a refrigerant leak? Can you see any other causes here I am not aware of?
Thanks for your help.
The fan rotates if pushed manually (it hasn't locked up). I've hit the high pressure reset button. Afterwards the unit will hum for a minute or two (no fan rotation) before turning off again. I've noticed a small amount of dried freon on some of the coils, so apparently there is a leak. I'm assuming this is the root of the problem.
However, will the fan stop turning due to a refrigerant leak? Can you see any other causes here I am not aware of?
Thanks for your help.