Hello, my name is Steve and I have a carrier 58PAV111 electronic ignition furnace that is giving me grief! The story... burners shut down and blower continues to run. LED code is 13. If we shut down power and let it sit for 5 minutes (as the instructions say) it will reset and run just fine or a day or so. Filter is new and clean. Furnace was cleaned about a year ago. Any ideas?
Thanks!

Hello?

Codes are on the blower door, what does it say code 13 is?

Check The Codes On Your Furnaces Blower Door I Believe That Code Is A Limit Failure Or Lockout Check Pressure Switches (call A Pro)

Hi there, yes it does say that, and also refers to "33" which lists several possibilities, that is where the confusion comes in as three pros have given me three different answers?? One said it was over heating another said just clean off the corrosion on the metal flame sensor rod.

Steve

How Old Is This Furnace?
What Size Is The Return?
Measure The Air Temp At The Closest Supply Grille And Air Temp At Return What's The Difference In Temp?