View Full Version : Master cylinder
dern
Apr 24, 2014, 05:27 PM
OK, guys here we go. I have a rounded brake line nut on the master cylinder and need some help taking it off. Any suggestions? Thanks
smoothy
Apr 24, 2014, 05:43 PM
Didn't use flare nut wrenches... right?
Vice grips always worked for me... but if they were that buggered up... the brake line really needs replaced too.
TxGreaseMonkey
Apr 24, 2014, 08:28 PM
Vise-Grips.
dern
Apr 24, 2014, 08:41 PM
Didn't use flare nut wrenches... right?
Vice grips always worked for me... but if they were that buggered up... the brake line really needs replaced too.
I have flare wrenches. The nut was already rounded
TxGreaseMonkey
Apr 25, 2014, 04:23 AM
If you end up replacing the brake line and installing a new nut, be sure to use a double-flaring tool to properly form the ends.
dern
Apr 25, 2014, 07:05 AM
If you end up replacing the brake line and installing a new nut, be sure to use a double-flaring tool to properly form the ends.
Thanks again