I have a 2 yrs old front load washer does not start but F5E02 and E08 shows up when I press the start button.
What I should do or what is the problem?

Buy a good digital multimeter and learn how to use it. Here are the manuals you need to repair the machine: https://dl.dropboxusercontent.com/u/8010163/How%20to%20use%20Test%20Equipment%20Service%20Manu al.pdf
https://dl.dropboxusercontent.com/u/8010163/Understanding%20automatic%20washer.pdf
https://dl.dropboxusercontent.com/u/8010163/Whirlpool-Kenmore%20washers.zip
https://dl.dropboxusercontent.com/u/8010163/Whirlpool%20Washers.zip
https://dl.dropboxusercontent.com/u/8010163/Whirlpool%20Direct%20Drive%20Washer%20Repair%20Ser vice%20Manual.pdf
https://dl.dropboxusercontent.com/u/8010163/Kenmore_Washer_Elite.pdf (Same as Whirlpool front-loader) Rely on the meter instead of guessing by changing parts.
To check fault codes, go here: Appliance Fault Codes - AppliancePartsPros.com (http://www.appliancepartspros.com/repair-help/appliance-fault-codes.html#Whirlpool%20Duet%20Front%20Loading%20Ga s%20and%20Electric%20Dryer%20Fault%20Codes)

My son has a maytag clothes washer and dryer that are 3yrs old The washer is showing error #EO2 and FO8 What can he do to fix it? Since these codes showed up. Please help! The washer stopped working last week because no water is coming to it

Please sir call the Whirlpool Customer Service in your area and get a technician if you don't have the skill set or tools to troubleshoot, diagnose, and fix your problem.

Whirlpool Service, Support and Repairs | Whirlpool | Refrigeration, Cooking, Dishwashers & Laundry Appliances (http://www.whirlpool.com/support/)

According to this manual: (F-02 Error) https://dl.dropboxusercontent.com/u/8010163/Maytag%20Epic%20Washer.pdf
1. Check the drain hose and make sure it is not plugged or kinked.
2. Unplug washer or disconnect power.
3. Check the electrical connections at the pump and make sure the pump is running.
4. Check the drain pump filter for foreign objects.
5. Plug in washer or reconnect power.
6. If the above does not correct the problem, go to step 7.
7. Unplug washer or disconnect power.
8. Replace the pump.
It does not show an F-08 Error.