Log in

View Full Version : Dryer hums, but will not turn on.


STEVEN1946
Jan 20, 2014, 12:59 PM
I have a Kenmore stackable dryer model 417.81142000. I have tried both 110 and 240 volt connections. It will hum, but does not start. I removed the dryer belt, and the motor turn freely. Any suggestions?

Kukui23
Feb 1, 2014, 03:25 PM
Will the motor run without the belt on? Will the drum turn freely? IF no to either of these, there is your problem. Note: without the belt on, there may be a switch that opens contact for the motor power, so you'd have to keep that active with the belt off. Its usually activated by the belt tensioner if there is one.