I have just spent the last 2 days cleaning, replacing parts in my gas dryer. It still doesn't have heat? Really frustrated right now!! I have tested all the back end and thermostats with my ohms meter and they're all good! I replaced the thermal fuse that was dead, still no heat? I'm a Tinbasher by trade. My venting exceeds the usual, it's clean and the back was completely vacuumed out as well! On to the burner area! I took the drum all apart! Coils replaced and found continuity to the igniter switch and sensor. I replaced the igniter switch as per the local parts guys suggestion and after reassembling it all.

Voilà NFG!! No friggin heat!! Help! Before I shoot it full of 1000 holes with my air nailer! Lol! Clint.

Please don't double post. We are all volunteers here. Someone will get to you.

Try these steps and see what's going on

https://www.askmehelpdesk.com/appliances/gas-dryer-troubleshooting-324952.html