Log in

View Full Version : How do I replace the front sealing strip on my Bosch Nexxt 500 series electric dryer.


epstephanie
Aug 12, 2013, 11:04 AM
I replaced the belt and still have a squealing noise when I turn the drum with the back panel off and the drum push into the front or am running a load of clothes. When I pull the drum a bit out of the front, the noise stops... am I going in the right direction?

drtom4444
Aug 13, 2013, 08:33 AM
It sounds like you either put it together wrong or did not clean it and lubricate it with white lithium grease. All bearings and support rollers must be lubricated with white lithium grease.