I've look through this forum but couldn't find this preticular problem.
My monitor doesn't get a signal from the moment windows is loaded.
It works perfectly until I hear the windows start-up sound.
I've got another monitor/tv connected (trough hdmi, first trough vga), this one keeps working fine.

Any views experience whit this problem?

Cheers,

(English is not my first language by the way)

In the bios there is usually a setting that determines which graphics should be loaded first, yours is probably set as vga. There is also a settings section for your graphics card to enable multi monitor support. If it is not on the system will default to the one the bios is set to enable first. Some cards do not support multi monitor at all and in that case there would be no setting for it. Your monitor/tv is vga, what is your regular monitor? Pci-e, dvi, vga as well or maybe something new. Is your graphics onboard the motherboard or a separate card?

What appeard to so the trick was pulling the plug of the TV.
Thanks for the help