todd_raleigh
May 8, 2013, 10:06 PM
The water pressure in my house is between 100 and 110 psi. Turning the screw on the PRV doesn't change the pressure, so it must be broke and I need to replace it. Looking at these photos, what is the best way to remove the PRV? It doesn't look like I can take some wrenches and disconnect it from the piping. Any suggestions?
Thanks in advance!
The first photo is the intake side. The second photo is the outlet side.
http://www.emmershy.com/images/PRV - Intake side.JPG
http://www.emmershy.com/images/PRV - Outlet side.JPG
Thanks in advance!
The first photo is the intake side. The second photo is the outlet side.
http://www.emmershy.com/images/PRV - Intake side.JPG
http://www.emmershy.com/images/PRV - Outlet side.JPG