HSOrtiz
Apr 5, 2013, 05:25 PM
We installed a new hot water heater. Turned on the pilot, hot water came out all rusty then cleared eventually but now it won't come out at all. Can you tell me what we did wrong that no water at all comes out from hot faucets.
massplumber2008
Apr 5, 2013, 05:28 PM
Start by removing the aerators from the faucets and see if you get water flow without the aerators in place. If you get flow, go around and clean and purge all faucets... hopefully. Reolves the issue.
If problem persists, post back...
Mark