I don't have water pressure to my toilet but I have pressure everywhere else what would be the cause of that?

Check the following for obstruction in lines:

1. Fill valve
2. Water supply line
3. Angle stop

It is most likely Fill Valve. Close water supply, remove fill valve, disassemble it ( or buy new one ) and reinstall. See if that helped

Back to you / Milo

.

Check the following for obstruction in lines:

1. Fill valve
2. Water supply line
3. Angle stop

It is most likely Fill Valve. Close water supply, remove fill valve, disassemble it ( or buy new one ) and reinstall. See if that helped

Back to you / Milo

.
Ok so I have plastic lines from my hot water heater and I redid the line to the toilet and still no water but again water pressure everywhere else and I even put all new parts in the toilet it just won't fill back up like the other toilet

Ok, close angle stop under the toilet. Unscrew toilet supply line from under the tank thread. Leave the other end attached to the angle stop. Take a bucket, put it next to the toilet, point the toilet supply line into the bucket - and turn angle stop ON. Now, tell me if you have water coming out of the supply line.

Back to you / Milo