pdcarter
Dec 8, 2012, 07:58 PM
I have replaces the seat and the spring as well as the cartridge and the faucet is still running. I have changed the side of the valve turns nothing seems to work. What else do I need to check or change to get rid of this problem?
pdcarter
speedball1
Dec 9, 2012, 08:17 AM
Hi pdcarer and welcome to The Plumbing Page at AskMeHelpDesk.com. You're re responding to a 5 year old dead thread so I gave you one of your own.
If the future please check the date before you post. Thanks.
When you had the valve apart did you turn the water back on for a few seconds to flush out the supplies and valve body? You might have left some debris in there. Go back and flush the valve out and get back to me with the results. Good luck, Tom