Little water pressure hot or cold at kitchen faucet,dishwasher,and water spout from refrigerator ? Just moved in two weeks ago,had inspection,worked OK ? There is a mini-restor connected under the sink on the hot water side ?

Shut the water off at the house shut off and disconnect both angle stop[s at the 1/2" chrome compression nut. Pull the angle stops clear. Now hold a pail in front of the open pipes and hhave someone turn the water on for a short time, Do you get pressure and a good flow out of the pipes? Let me know, Tom

Having trouble responding on this sight. Thanks Tom,for your response. The only
Shut off valve I see is on the top of water heater. Tried to shut off can only get it to turn half way. It's made of a tan pvc and so is the valve with a butterfly type knob.
Was going to try channel locks but afraid it might snap ?

Leave the water heater alone. I'm talking about the house shut off. Are you on a pump or city water? Back to you, Tom

Leave the water heater alone. I'm talking about the house shut off. Are you on a pump or city water? Back to you, Tom

I knew you were talking about house shut off, but could not find it. A neighbor told me to look outside were the water faucet is and found it there. I am use to seeing it in the garage. I have city water. I am going to wait till the morning and check it then.
Will get back to you and let you know if that's OK. Thanks for your patience and help.
Gary.

In post #2 I'm trying to flush the supplies out. Let me know what you find. Good luck, Tom

Tom, I tried what you said and I did get great pressure coming out of hot and cold. So the problem is the kitchen faucet. I took off the head and turned it on, the pressure was the same so we know it's not clogged there. There is only one allen fitting for the neck it's one of those big curve things. To turn the water on is just a small lever at the back and I don't see any way to remove. There are no screws.You just pull back and then left or right at 45 degrees. Do you know if this can be fixed, or do I need to replace ? Gary.

Hey Gary,
What's the brand name of your faucet. Back to you Tom

I had looked all over this faucet and I can't find any name at all. I took a picture on my iPhone will
Try to send from it. I don't see a way to send on this site ?

Tom I don't see a way I can send u the picture of the faucet through this site, unless you do ? Also I guess the water in the frig door is another issue. I did change the mwf filter inside frig but still works the same, very little water coming out ?

A. "Attach" files (including pictures) from your computer. This method puts the attached file below the text of the post.
Click on an Ask or Answer button to ask or answer a question
Compose your question or answer in the window.
Under the window where you composed your question or answer is a section called Additional Options.
Click on the Manage Attachments button: a pop-up dialog will open. NOTE: The Manage Attachments dialog lists the maximum sizes of the various types of files that may be attached.
Click the Browse button to navigate to the image on your computer and double click the file on your computer: this will return you to the dialog window.
Click the Upload button.
Click the link to close the dialog window OR repeat numbers 5 & 6 to attach another image.
B. "Embed" image(s) from the internet. This method inserts an image wherever you wish within the text of your post.
Click the Insert Image icon above the posting window: A pop-up asking for the URL will open.
Enter the URL of the image in the field then click the OK button.

Hi Tom, I unscrewed the lever and behind there was an allen screw, was able to remove hot/cold valve. Going to go to plumbing supply and see if I can replace. I did send picture,thanks
Again for info.Will let you know if I can get part and that I got it to work.
Gary

Well this is getting discouraging. Went to home depot and found replacement cartridge gb-1 fits models 169-640 & 231-087 it is a glacier bay model. But still the same result ? What do you suggest next ?
Gary.