View Full Version : Kitchenaid Dishwasher Diagnostic codes
jlmc
Sep 7, 2012, 07:42 AM
The "Child Lock" light on my Kitchenaid KUDS25SHBT1 dishwwasher is continuously blinking and none of the controls work. The manual says that the "Energy Saver Dry" button should be depressed for 4 seconds to turn the "Child Lock" off. This hasn't worked. I tried turning the power off for a short time and that didn't work either. The machine has worked fine up until now and I'm sure that if I can get the machine to start it will work fine again. Any suggestions?
drtom4444
Sep 8, 2012, 05:34 AM
Look at these: https://dl.dropbox.com/u/8010163/KitchenAid%20KD-01%20Stainless%20Steel%20Dishwasher.pdf
https://dl.dropbox.com/u/8010163/KitchenAid_Briva%20Dishwasher.pdf
More than likely you have to adjust something like the latch. Try turning power off at breaker.
M4MAR
Nov 11, 2013, 01:10 PM
Xx
Dishwasher kitchen aide clean light will not turn off. Just blinks 7 times,hesitates and then lights up again. Tried shutting off circuit breaker, unplugging, reseting etc. How do I correct this malfunction.