mldelman
Jul 30, 2012, 09:32 AM
I just had major construction done on my house and all the walls around the kitchen were open (including the ceiling). The counters and sink were finally installed and I tested the sink. I noticed it drained very slowly like a clogged sink. I looked under the sink in the cabinet and noticed that there was a short vent with a vent cap. I was surprised to see this since all the walls were open why not run a proper vent stack. Well I pulled the cap off the vent and the sink drained immediately. I put it back on and it made some funny clicking noises.
Still wondering why the plumber (sub contractor) didn't run a full stack. Was he being lazy or cheap? Is there a preference between full stack or AAV if you have the ability to run a full stack to the roof?
I just want to get my facts straight before I make an issue of this with the contractor.
Thanks
Marc
Long Island, NY
Still wondering why the plumber (sub contractor) didn't run a full stack. Was he being lazy or cheap? Is there a preference between full stack or AAV if you have the ability to run a full stack to the roof?
I just want to get my facts straight before I make an issue of this with the contractor.
Thanks
Marc
Long Island, NY