Donald Edwards
Jul 9, 2012, 06:12 PM
I have a kohler k181s. What type of coil do I need and do I need an external resistor?
Thanks for any help you can give.
Gamed
Jul 9, 2012, 06:30 PM
You could use a Kohler magneto coil but their hard to find and cost upwards of 80$. Tecumseh coil was direct replacement except for wire length and is still very available. You can buy new one around $20 shipped. Hope this was Helpful
crigby
Jul 9, 2012, 07:02 PM
Hi,
If this a battery ignition unit, find the Kohler coil and do not worry about it, or an aftermarket replacement. The Kohler number is 41-519-21-S and the Oregon Number is 33-333. Huge difference in price; about $80 for the OEM and $35 for the Oregon. See the service manual at:
http://www.asberry.net/files/TP-2379.pdf
And the Oregon can be looked up at:
Passport®: OEP Power Search by OREGON® (http://www.oregonchain.com/lookups/powersearch.aspx)
And Oregon is at:
Kohler Ignition and Magneto Coils (http://www.lawnmowerpros.com/Kohler/Kohler-Ignition-Coils.asp)
Peace,
Clarke