Log in

View Full Version : How to replace a frigidaire gallery gas dryer thermal limiter


raymond s
Jul 2, 2012, 10:22 AM
I have a frigidaire gallery stackable gas clothes dryer. I tried to dry some things and all of the sudden, it would not turn on. I have tried to test every component on the face panel and I think they all checked out OK, maening when tested they al showed a no resistance with an ohm meter. Is there even a breaker or fuse I am missing? I would greatly appreciate any help. Thanks

ChrisPolk
Jul 3, 2012, 08:43 AM
Did it flash any specific lights, have any audible beeps or show an alpha-numeric error code?

drtom4444
Jul 3, 2012, 09:25 AM
Look in this manual: https://dl.dropbox.com/u/8010163/Frigidaire%20Dryers%20Gas%20and%20Electric%20Elect ronic%20Controls%20.pdf
And this one: https://dl.dropbox.com/u/8010163/Frigidaire_27in_Washer_and_%20Dryer_Gas%20and%20El ectric.pdf
The controls are about the same in all of them. It sounds like it got dirty and blew the main safety. The safeties are wired in series so you just follow the wires from one to the other until you find where the break is. I like to go from the plug terminals and trace from those until I find the break. With the schematics you will be able to do that.