View Full Version : How to tap a 1/4 pvc tube into a drain
soonerchamp
Jun 19, 2012, 04:19 PM
I have a ( what looks like 1/4 inch PVC poly tube that was tapped into my drain under the kitchen sink. It is a reverse osmosis water system. The fitting is corroded and broke. What would that fitting be called?
massplumber2008
Jun 19, 2012, 04:24 PM
Hi Sc...
It sounds like you may be talking about a 1/4" male x 1/4" hose barb adapter (comes in brass or plastic)... see image below. These are available at all home improvement stores.
Is this what you wanted?
Mark
soonerchamp
Jun 19, 2012, 04:54 PM
Yes that's probably it. Thanks