View Full Version : Kenmore Elite Dryer Toe panel - how to get panel OFF!
debsherlrn
Feb 27, 2007, 10:50 PM
I have a Kenmore Elite Model # 110.600094990 27 inch Electric Dryer - NOW How the heck does one take the Toe Panel Off / or Open this lower section of the dryer? There are two lower edge clips and two upper edge retainers. I CAN NOT get the panel to budge! This is a 7 yr old unit. Thx DAS
jake4
Mar 5, 2007, 08:54 PM
Is this a matching pair to a front load washer
debsherlrn
Mar 6, 2007, 02:41 PM
No it is not Jake, but I have it figured out. Thanks anyway. Just had to slip a flat head skrew driver into the top edge and depress the metal retainer clips ( one on each end) and poofff - off it came. DAS:)
doug238
Mar 24, 2007, 10:49 PM
Diagnostic Guide Link
I found service tech diagnostic guides (PDF format) during an online search. This includes instructions on putting the dryer into test mode in order to check switches, etc. Here are the links:
Gas Dryer:
http://www.servicematters.com/docs/wiring/Tech%20Sheet%20-%203980053.pdf
Electric Dryer:
http://www.servicematters.com/docs/wiring/Tech%20Sheet%20-%203979705.pdf