SHayesMiller
May 30, 2012, 06:35 PM
Model Number: DLE2516W
Brand: LG
Age: 1-5 years
Several years ago the sensor dry function stopped working in the dryer, but we were out of warranty so we just switched to the timed dry function instead. Now, the timed dry function does not work either. When we turn the unit on and select a timed dry (20, 30, 40, 50, or 60) it *usually* starts right away (though increasingly it will just "click" and go immediately into the wrinkle care mode) and then seconds later stops drying and goes into what looks like the "wrinkle care" mode. The unit stays powered on and the LED display is circling, similar to when it is in the wrinkle care cycle. After a minute or two, it will cycle back on (actively drying the clothes), only to stop again after a few seconds. Each time it cycles off (stops drying) we hear a clicking sound.
I've tried unplugging the unit to get it to reboot, but that does not work.
What do I need to do to attempt a repair?
Thanks in advance for any insight or advice!
Brand: LG
Age: 1-5 years
Several years ago the sensor dry function stopped working in the dryer, but we were out of warranty so we just switched to the timed dry function instead. Now, the timed dry function does not work either. When we turn the unit on and select a timed dry (20, 30, 40, 50, or 60) it *usually* starts right away (though increasingly it will just "click" and go immediately into the wrinkle care mode) and then seconds later stops drying and goes into what looks like the "wrinkle care" mode. The unit stays powered on and the LED display is circling, similar to when it is in the wrinkle care cycle. After a minute or two, it will cycle back on (actively drying the clothes), only to stop again after a few seconds. Each time it cycles off (stops drying) we hear a clicking sound.
I've tried unplugging the unit to get it to reboot, but that does not work.
What do I need to do to attempt a repair?
Thanks in advance for any insight or advice!