mowmanmike
May 21, 2012, 07:50 PM
I have a wright sentar zero tur 52". It runs but when I turn on the pto the blades turn slow or not at all.
crigby
Jun 30, 2012, 08:46 PM
Hi,
Here is a link to the parts manual. If the belt is routed correctly, suggest the nest step is a clutch adjustment. There are three slotted holes in the housing and three nuts to adjust. Set the gap through the slots to 0.012"
http://www.wrightmfg.com/index.cfm?fuseaction=Support.7931F49A-FFE3-F0A5-14FE525345D360C5
Peace,
Clarke