View Full Version : 2005 Troybilt Bronco won't start
vopro
Apr 19, 2012, 05:28 PM
I have a Troybilt Bronco 2005 w/Briggs 18.5, new battery, new starter, just changed oil and filter... will not crank. Checked seat safety, PTO, fuse. It's like the system is in some sort of safety lock or as if the engine is seized. Thoughts?
vopro
Apr 20, 2012, 10:59 AM
UPDATE: If found one of the deck springs broken (Extension Spring) part number 732-0308A. Could this be part of a "safety" related to the PTO, whereby it things the blades are engaged, thus not allowing it to crank?
vopro
Apr 20, 2012, 12:42 PM
UPDATE: If found one of the deck springs broken (Extension Spring) part number 732-0308A. Could this be part of a "safety" related to the PTO, whereby it things the blades are engaged, thus not allowing it to crank?
UPDATE AGAIN!! Well, I've found the problem for sure, just not sure what the cause is or how to remedy. I have note been able to get the Magneto off, but I see chunks of broken magnet hanging on the bottom of the magneto. I pulled one chunk the size of a quarter off...
vopro
Apr 22, 2012, 09:30 AM
UPDATE AGAIN!!! Well, I've found the problem for sure, just not sure what the cause is or how to remedy. I have note been able to get the Magneto off, but I see chunks of broken magnet hanging on the bottom of the magneto. I pulled one chunk the size of a quarter off.....
GOT magneto/stater off and sure enough one of the magnets dislodged and dropped on top of the alternator ring, but ripping the whole thing apart and binding the rotation... so now I need to find a new magneto/stater/alternator
crigby
Apr 22, 2012, 10:41 AM
Hi,
If you could supply engine numbers, I can supply the parts breakdown, either a link or directly attached depending on size.)
Peace,
Clarke
vopro
Apr 22, 2012, 11:01 AM
Hi,
If you could supply engine numbers, I can supply the parts breakdown, either a link or directly attached depending on size.)
Peace,
Clarke
THANK YOU for your note: What I see is "FAMILY: 5BSXS.5012VP 276016. This is a Briggs 18.5 Intek built in 2005. Hope these numbers help.
crigby
Apr 22, 2012, 03:30 PM
Hi,
Those are the EPA test numbers. The model would be something like 310707 1526E1 etched into a black and silver tag on top and near the front of the engine.
On an Intek single cylinder, espect something like a 693557 flywheel and either a 696459 stator(two wire flat connector) or a 696457 stator(one wire round connector and a separate regulator.)
Peace,
Clarke
vopro
Apr 22, 2012, 05:07 PM
GOTCHA!
Model: 31P777
Type: 0293 E2
Code: 050415ZD
crigby
Apr 22, 2012, 06:53 PM
Hi,
You have a dual circuit alternator. Flywheel #693557 and alternator #696459. The IPL(Illustrated Parts List) can be found at:
http://bsintek.basco.com/BriggsDocumentDisplay/18mtzIXNnfBhU7y.pdf
Peace,
Clarke
vopro
Apr 23, 2012, 04:00 PM
SO helpful... thank you very much