martin92
Nov 19, 2011, 02:17 PM
I changed the distributo cap and rotar an still no spark. Could that mean my distributor is bad?
TxGreaseMonkey
Nov 19, 2011, 02:23 PM
Replace the Ignition Control Module (ICM) and coil. Apply silicone heat transfer grease to the back of the new ICM. That should solve the problem.
jershu3
Nov 28, 2011, 06:54 PM
There was a recall on some early 90's model Accords & Civics. Call the dealer with your VIN# and milage, they can check. If not, distributor is a common ( and expensive ) problem with that generation of Hondas