How do you connect a Quasar VH200 to a Samsang LCD TV

Assuming that is a VCR (not sure, but guessing based on the model) there should be one of two ways to connect it to the TV. The first and easiest is to use a coax connection out from the VCR into the TV. If you are using an antenna or basic cable you will need to run the line coming from the wall to the input of the VCR.

The other method is to use composite RCA connections. Some VCRs only have two of the three connections, while others will have all three. The composite RCA connections are the yellow, white, and red connections (or as mentioned, sometimes just yellow and white). Depending on which Samsung LCD TV you have, it might be a little confusing where to connect these. Some of the Samsung TVs use Component 1 as AV 1 also.

You might notice on the connections that there is a set of 5 connectors (green, blue, red, and white and red). The green connector might also have a yellow circle around it or say Y/Video under it. To connect to this, just plug the yellow cable from the VCR into the Y/Video or green connector. Then connect the white and red for audio to the white and red on the far end.