This has no allen screws and was installed in 2005 when the house was built. I went from an occasional drip to a steady drip. I looked at all the local stores and they do not carry the cartridge. So, I ordered one online. Now, how to install it properly?

Hi Betygramma

Here is a video showing you the basics involved in working with a delta shower valve. Your valve will break down in a very similar manner.

XgqNJ_9K54I

Here is another video showing a conversion from the 1400 series to the 1700 series... should help some more here:

JljZXvWQAXA


Let me know if you have questions,OK?

Mark

Thanks, the videos helped a lot. Can you tell me how long does a cartridge usually last?

They can fail in a day or last 25 years, I've had both. Cartridges fail when seals or O rings wear out but can also fail when debris clogs them. This can be dislodged during installtion but a clog usually can be cleared out

It probably made a difference because I had a water softener installed a month ago. I didn't find any debris when I took it apart, but I had a ****ens of a time getting those little spring seals staying in there when I put everything back together. Thanks for all your help. When I get the new parts I can't wait to do it the right way instead of like I did last time!

Good luck!

How to replace washers in 1700 cartridge?

Hi benblew and Welcome to The Plumbing Page. At AskMeHelpDesk.com. You're responding to a 1 year olde dead thread.. Look in then upper left hand corner of the first post form the date in the first post before you post, Thanks,
What's bad and what do you want to replace. Is there a complaint in there somewhere? Back to you, Tom

Dear Sirs The 1700 Shower faucet was instaled but now the hot water is not working as usual. Down in the kitchen (first floor) sometimes to get hot water takes a long time and in the other bathroom also. What can I do to fix this problem? Please send aid, Thanks

Dear Sirs The 1700 Shower faucet was instaled but now the hot water is not working as usual. Down in the kitchen (first floor) sometimes to get hot water takes a long time and in the other bathroom also. What can I do to fix this problem? Please send aid, Thanks
Now to get hot water in the second floor in the other bathroom that does not have a delta faucet (with control of hot water) I must flush the toilet to get hot water!? I can not understand why? Because before it was install the Delta 1700 (Saturday Feb.2), the hot water was working as usual!! Please send aid??

Hi Alexis

First thing to try would be to remove the cartridge and rotate it 180 degrees... sounds like it was put in backward. Let us know if that fixes things, OK?

Mark