Ridearound
Nov 1, 2011, 02:26 PM
I drove it yesterday and it done fine and today it will not start I can hear the fuel pump pumping
TxGreaseMonkey
Nov 1, 2011, 02:50 PM
If the CEL comes on for 2 seconds and then goes out, after turning the ignition switch to ON (Position II), then replace the Ignition Control Module (ICM) and coil inside the distributor. Be sure to apply silicone heat transfer compound to the back of the new ICM.
TxGreaseMonkey
Nov 1, 2011, 05:02 PM
Check Engine Light (CEL).