Hello,

I am trying to install a carrier 33cs051-fs thermostat. It is replacing a york 2th11702224a (actually a honeywell). It is a heatpump. Below are images of the original wiring and my options for the carrier. As it sits now, when I flip the breaker back on, the carrer thermostat comes alive for about a second and then turns off. Flipping the breaker off and then on again a few seconds later results in the same thing. Any help would be greatly appreciated. The one assumption I made was that x on the Honeywell was C on the carrier...

Image 1 Original wiring
https://picasaweb.google.com/100881641194281730377/Desktop?authkey=Gv1sRgCLKZmeTY6czFJQ#5665434875539 685602

Carrier1
https://picasaweb.google.com/100881641194281730377/Desktop?authkey=Gv1sRgCLKZmeTY6czFJQ#5665434881099 314610

Carrier 2
https://picasaweb.google.com/100881641194281730377/Desktop?authkey=Gv1sRgCLKZmeTY6czFJQ#5665434885947 039922

It appears my images did not load. Here they are in a web album

https://picasaweb.google.com/100881641194281730377/Desktop#

Thank you.

Upload a picture going back to the terminals to your unit please. Heat Pumps are an entirely different breed, not as simple as a furnace and a/c. Thank you.